- Supporting Hard Drive Capacity: 4TB
- External Interface: USB
- Package: Yes
- Internal Interface: NVME/SATA
- Case Material: Aluminum
- Size: 1.8″
- Model Number: i9x
- Brand Name: JEYI
- Origin: Mainland China
1. 3 clicks to reconnect the drive (no need to disconnect the cable)
2. 5 clicks to turn on write protection (exit requires unplugging the cable again)
3. Multi-color LEDs
JEYI i9X Display Visual Dual M.2 Protocol SSD Enclosure
It Can Also Display
Conncecting USB 2.0 – 5 seconds Orange
Conncecting USB 3.0 5G – 5 seconds Green
Conncecting USB 3.2 10G – 5 seconds Purple
Write-protected – remains in a static blue state
Reading – the light flashes rapidly in succession
Sleep Mode – multi-color breathing light effect
After Safe Ejection – in stand by mode – breathing light effect for “USB 2.0 Orange” “USB3.0 Blue” “USB3.1 Purple”
1G File Transfer in 1 Second
NVMe enclosure adopts USB 3.1 Gen 2 transfer speed up to 10Gbps
NOTE: SATA SSD ONLY SUPPORT 6Gbps (600Mb/s Max)
How to set write protection (https://youtu.be/aUfxHxRKM5E)
Enter write protect: touch the screen 5 times, then re-plug the cable to enter protect mode (red light to long blue)
Exit write protect: touch the screen 5 times, then re-plug the cable exit protect mode (long blue light to red light)
Note: Write protection with memory function, so as long as you don’t exit the write protect function, it will remain in protected mode
Reconnect the drive without re-plug cable
JEYI exclusive patent: When you exit the drive, you don’t need to unplug the cable, just click the screen 3 times to reconnect the drive.
1 minutes into sleep mode to save energy
If the SSD case goes into sleep mode, you need to do a read action on the drive to exit sleep mode.
Note: Sleep time can be modified by firmware
Efficient Cooling Design
All-aluminum body with multiple grooves to effectively increase the cooling effect
Support Both NVMe and SATA SSD
Supports both M.2 NVMe (M-Key,B&M-Key) and M.2 SATA(B&M-Key)
RTL9210B Dual M.2 Protocols
The RTL9210B-CG is a USB bridge that combines a USB device with both a PCI Express (PCle) controller and a SATA controller
Supports TRIM, ASPM, UASP Acceleration, and Sleep Mode
Full Aluminum Case
Keeps your SSD cool with thermal compound pads
Two Cables Inside (Gift)
1pcs TYPE C To C USB 3.2 Gen2 Cable
1Pcs TYPE A To C USB 3.2 Gen2 Cabl
Package Contents
1pc NVMe/SATA SSD Enclosure
1Pc Screwdriver
1Pc C to C Cable
1Pc A to C Cable
10Pcs Thernal Pads